18700625 POLYPAK MOLYTHANE
Double-tap and hold to zoom.
Mouse over the image to zoom.
Click to Enlarge

N 15.86 X 25.4 X 5.2

18700625 POLYPAK MOLYTHANE

UPC: 30864906

Untitled Document

 

POLYPAK U-Cup

Polypak SPP (Rod Seals)

Parker’s Standard PolyPak is a squeeze seal with a symmetrical profile for use in either rod or piston applications. The standard Molythane® shell provides high wear resistance and the o-ring energizer functions as a spring to maintain sealing contact under low pressure. The Standard PolyPak utilizes a straight cut scraper lip design formed by a precision trimming process. The scraper edge wipes both fluid film and contamination away from the seal. A wide selection of sizes and alternate compounds allow this profile to match up with many hydraulic applications. The Standard PolyPak is an economical choice as a stand alone rod or piston seal. With less squeeze force than the Deep or Type B profiles, the Standard PolyPak can be installed back-toback, in separate glands, for bi-directional sealing. To protect against pressure trapping, it is recommended that the o-ring be removed from the Standard PolyPak facing the lower pressure side of the application.

Application:

  • Working Pressure: = 345 bar

  • Working Temperature: -54°C to 93°C (-65°F to 200°F)

  • Surface Speed: = 1.6 m/s


 

Polypak Compounds